Working Principle 
    The powder raw materials and adhesives in a cylinder container are fully mixed into humid at the bottom. Then it is cut into uniform granules by the high-speed crusher at the side. 

Features 
1 The machine adopts horizontal cylinder structure. Its structure is reasonable; 
2 Using air-filling seal shaft to drive. When washed, it can be changed to water;
3 Ball-type granules, good fluidness; 
4 Compared the traditional process, 25% of adhesive can be reduced and the drying time can be shorted; 
5 The time of mixing in drying is 2-minutes each time, and the time of granulating is 1-4 minutes. Compared with the traditional process, efficiency rises 4-5 times; 
6 In the same sealed container, the processing: dry-mixing and humidity-mixing and granulating can be finished. It’s conformity with the requirements of GMP; 
7 The whole operation has strict safety and protective measures. 

Technical Parameters